
San Diego Remodel Guide
San Diego Remodeling Cost Calculator
Build a preliminary budget for one project or combine several scopes. Choose the closest size and finish level to see a realistic planning range based on published San Diego-area contractor pricing.
Tell us what you’re planning
Select every scope you may include. You can add more than one project type and adjust its size and finish.
Construction prices are broad San Diego County planning ranges. Permit rules and fees vary by the exact city, community, and project.
Choose project types
Kitchen remodel
Layout changes, wall removal, moving plumbing/gas, service-panel work, and premium appliances can exceed these ranges.
Bathroom remodel
A tub-to-shower conversion or moving plumbing can push a standard bath toward the top of its range.
ADU / garage conversion
Utility connections, fire access, foundation, grading, sewer capacity, design, and impact fees can materially change the total. The range is a planning allowance, not a feasibility finding.
Home addition
Per-square-foot budgets are broad and assume a typical finished room. Kitchens, bathrooms, major foundation work, difficult access, and structural upgrades cost more.
Flooring
Per-square-foot rates assume a reasonably sound, accessible subfloor. Leveling, moisture remediation, stairs, baseboards, furniture moving, and intricate patterns are extra.
Windows & patio doors
Oversized, bay, specialty-shaped, stucco-repair, or opening-size changes are outside a standard-window allowance. Ask whether glass, trim, disposal, and permits are included in bids.
Concrete or paver patio
Assumes ordinary access and a prepared, buildable area. Demolition, export, retaining, drainage, steps, utilities, and difficult slopes can add substantial cost.
Patio cover / pergola
Attached solid covers, electrical additions, custom spans, screens, heaters, engineering, and setback constraints can raise costs and trigger permits.
Landscaping / backyard scope
Use this for planting, irrigation, grading, lighting, and general backyard work. Add patios, covers, walls, or outdoor kitchens separately only if they are not already included in your selected overall scope.
Fence
Gate count, tear-out, grade changes, access, retaining conditions, and neighbor coordination can change the installed price.
Retaining wall
Walls supporting a slope, driveway, building, or other surcharge need project-specific engineering. Height thresholds, drainage, footing, access, and permits can move a real bid well beyond this screening range.
Outdoor kitchen
Gas, water, electrical trenching, drainage, counters, and appliance selections drive the range. Long utility runs and custom masonry are not priced by this quick estimate.
Your selections stay in this browser only. No personal information is requested or stored.
What this calculator includes—and what it can’t know yet
This calculator is designed to help with early budgeting across the main San Diego home-improvement projects. It estimates a low-to-high range from the dimensions and scope you enter. Cost ranges are not exact prices: two projects with the same area can differ because of access, existing conditions, product choices, and the work hidden behind walls or under paving.
- Usually reflected: typical contractor labor and materials for the selected installed scope, at ordinary access and mid-market product assumptions.
- Not automatically included: permit, plan-check and inspection fees; design, survey, structural or geotechnical engineering; utility or sewer upgrades; asbestos/lead remediation; HOA or coastal review; sales tax where applicable; and unusual demolition, hauling, drainage, or access work.
- Don’t double-count: if you choose a full outdoor-living package, do not also add the same patio, cover, wall, or outdoor kitchen as a separate item.
- Get comparable bids: provide contractors with the same measurements, finish selections, demolition scope, permit responsibility, allowances, and exclusions.
How the estimates are built
Ranges are built as San Diego-area planning bands and adjusted to the project dimensions, materials, and scope selected above. Typical labor and materials for ordinary access and mid-market products are reflected. These bands are reviewed periodically; actual bids vary with site conditions, product selections, project complexity, and contractor scope. Permit fees are excluded because each jurisdiction calculates them based on the project and its review path.
Cost calculator questions
How close will this estimate be to a contractor quote?
It is an early planning range, not a measured bid. It can help establish a starting budget when you know the basic scope. A contractor still needs to inspect the property, confirm dimensions and materials, identify permit requirements, and price hidden conditions.
Are San Diego permit fees included?
No. Permit, plan-check, inspection, design, and engineering costs are not included as one blanket amount because the fee depends on the approving jurisdiction, work type, project valuation, and plan review path. The City of San Diego publishes its current construction fee schedule; other cities and the County use their own procedures and fees.
Why is my contractor’s price higher than the calculator?
The proposal may include work this calculator cannot see, such as demolition and disposal, subfloor or foundation repair, structural engineering, utility upgrades, drainage, premium products, difficult access, or jurisdiction-specific compliance. Compare the written scope and exclusions line by line before comparing totals.
Can I combine projects?
Yes. Select multiple project types and the calculator will add their ranges. Avoid selecting the same work twice—for example, don’t include a full backyard package and separately add a patio or cover already included in that package.
